Putty powder is superior to talcum powder and glue in terms of performance and environmental protection. But putty powder construction is more difficult, many workers can not grasp the construction skills, always feel too hard when using, poor operation will crack.

　　膩子粉是水性涂料，相對于滑石粉+膠水，膩子粉更環保，批出來的墻更硬。

　　Putty powder is a water-borne paint. Compared with talcum powder and glue, putty powder is more environmentally friendly and the batched walls are harder.

　　墻壁很容易就磕碰出坑坑洼洼來，其原因就是墻面太軟。這種情況多數是使用滑石粉過多造成的。白水泥的作用是加強墻面的硬度，白水泥比例少些，調出的混合膏狀體就軟一些，工人師傅就好施工一些，完工后墻面的感覺就軟一些；白水泥的比例多一些，調出來的膏狀體就硬一些，施工起來就費力一些，完工后墻面的感覺就硬一些。

　　The wall is easy to bump into pits and holes, the reason is that the wall is too soft. This situation is mostly caused by the excessive use of talc powder. The function of white cement is to strengthen the hardness of the wall, the proportion of white cement is less, the mixed paste is softer, the worker is better at construction, the feeling of the wall is softer after completion; the proportion of white cement is more, the paste is harder, the construction is more laborious, and the feeling of the wall is harder after completion.

　　滑石粉工藝，使用的不僅僅是滑石粉+膠水，它們的組合還有一個非常重要的原料：白水泥，即：滑石粉+白水泥+膠水。批遍底的時候滑石粉：白水泥的比例大約為5.5~5：4.5~5；批第二遍底的時候，滑石粉：白水泥的比例大約為6.5~6：3.5~4；每次逐漸減少白水泥的用量，后一遍面及倒數第二遍面的時基本上就不用添加白水泥了。

　　Talc powder process, not only uses talc powder + glue, their combination also has a very important raw material: white cement, namely: talc powder + white cement + glue. Talc powder: white cement ratio is about 5.5-5:4.5-5 at the first end of the batch; talc powder: white cement ratio is about 6.5-6:3.5-4 at the second end of the batch; white cement consumption is gradually reduced every time, and white cement is basically not added at the last and penultimate end.

　　不過現在的膩子只能算是一個“代詞”了。由于用膩子粉或膩子膏處理的墻面還是比較容易產生裂紋，且造價不低，現在的裝修公司會建議使用滑石粉加膩子膠水的做法來對墻的進行基層的找平處理。當然刷出來的墻，又平整又美觀，又耐用了。理論上不管是膩子粉還是滑石粉+白水泥+膠水，遍底批上以后都要澆水加以養護，可以防止開裂。

　　But now putty can only be regarded as a pronoun. Because the wall treated with putty powder or putty paste is relatively easy to crack, and the cost is not low, now the decoration company will recommend the use of talc powder and putty glue to leveling the wall base. Of course, the painted walls are flat, beautiful and durable. In theory, whether it is putty powder or talc powder + white cement + glue, after the first batch, it should be watered and maintained to prevent cracking.