耐水膩?zhàn)雍推胀佔拥膮^(qū)別

The difference between water-resistant putty and ordinary putty

一粘結度

Bond strength

1普通膩?zhàn)樱赫辰Y(jié)強度低，普通膩?zhàn)拥臉?biāo)準狀態粘結強度大于0.25Mpa，對于浸水后的強度沒有要求。

1. Ordinary putty: The bonding strength is low, and the standard bonding strength of ordinary putty is greater than 0.25Mpa. There is no requirement for the strength after immersion in water.

2耐水膩?zhàn)樱赫辰Y(jié)強度高，耐水膩?zhàn)拥臉?biāo)準狀態粘結強度大于0.5Mpa，浸水后強度大于0.3Mpa。

2. Water resistant putty: With high bonding strength, the standard bonding strength of water resistant putty is greater than 0.5Mpa, and the strength after immersion is greater than 0.3Mpa.

二耐水性

2. Water resistance

1普通膩?zhàn)樱涵h(huán)境濕度較高，容易出現疏松粉化脫皮，而造成乳膠漆基層開裂空鼓脫落。

1. Ordinary putty: Due to high humidity in the environment, it is prone to loosening, powdering, and peeling, resulting in cracking, hollowing, and peeling of the latex paint base layer.

2耐水膩?zhàn)樱?8小時耐水性國家檢測無異常。

2. Water resistant putty: National testing for water resistance within 48 hours shows no abnormalities.

耐水膩?zhàn)雍推胀佔拥膮^(qū)別

The difference between water-resistant putty and ordinary putty

三耐堿性

Three alkali resistant

1普通膩?zhàn)樱翰荒蛪A，無法阻擋水泥基層返堿，易霉變。

1. Ordinary putty: Not resistant to alkali, unable to block the alkali return of the cement base layer, and prone to mold.

2耐水膩?zhàn)樱?4小時耐堿性國家檢測無異常。

2. Water resistant putty: National testing for alkali resistance within 24 hours shows no abnormalities.

耐水膩?zhàn)臃酆推胀佔臃蹍^(qū)別在哪里，讀完你就明白

What is the difference between waterproof putty powder and ordinary putty powder? After reading it, you will understand

四性?xún)r(jià)比

Four cost-effectiveness ratios

耐水膩?zhàn)訂蝺r(jià)是普通的1-2倍，這也是影響耐水膩?zhàn)油茝V的一個因素，但使耐水膩?zhàn)雍蟮难b飾效果是普通膩?zhàn)舆h(yuǎn)遠達不到的。而且從涂料用量以及二次裝修時的膩?zhàn)拥某杀竞褪┕べM(fèi)用綜合計算，則使用耐水膩?zhàn)映杀镜汀?/p>

The unit price of waterproof putty is 1-2 times that of ordinary putty, which is also a factor affecting the promotion of waterproof putty. However, the decorative effect of waterproof putty is far from that of ordinary putty. Moreover, based on the comprehensive calculation of the amount of paint used, as well as the cost and construction cost of putty during secondary decoration, the use of water-resistant putty has a lower cost.

五用量

Five Dosages

耐水膩?zhàn)犹赜械陌锥群椭旅芏龋蛊鋯挝幻娣e涂料附著力遮蓋率比使用普通膩?zhàn)拥膲w可節省25～30%的涂料用量。

The unique whiteness and density of water-resistant putty enable it to save 25-30% of paint usage per unit area of adhesion coverage compared to walls using ordinary putty.

六手感

Six hand feel

耐水膩?zhàn)邮┕ず蟊砻婀饣?xì)膩，收光處理后的膩?zhàn)訒?huì)給人滑膩的手感，具備裝飾效果，如果對墻面的要求不太高，耐水膩?zhàn)由踔量芍苯幼鳛檠b飾層。

After the application of waterproof putty, the surface is smooth and delicate. The putty treated with light will give a smooth feel and have a decorative effect. If the requirements for the wall are not too high, waterproof putty can even be directly used as a decorative layer.