膩?zhàn)臃圩鳛榻ㄖb修的重要材料，其質量和性能對墻面效果有著至關重要的影響。特別是外墻膩?zhàn)臃郏捎谄涫褂铆h(huán)境和要求，對于產品的質量和性能要求更為嚴格。然而，在使用過程中，有時會出現雜質問題，這不僅影響了膩?zhàn)臃鄣拿烙^效果，還可能對其性能產生不良影響。本文將重點探討外墻膩?zhàn)臃鄢霈F(xiàn)雜質的原因，并提出相應的措施，同時強調選擇優質的膩?zhàn)臃蹚S家的重要性。

Putty powder, as an important material for building decoration, its quality and performance have a crucial impact on the wall effect. Especially for exterior wall putty powder, due to its usage environment and requirements, the quality and performance requirements of the product are more stringent. However, during use, impurities may sometimes occur, which not only affects the aesthetic effect of putty powder, but may also have adverse effects on its performance. This article will focus on exploring the reasons for impurities in exterior wall putty powder and propose corresponding measures, while emphasizing the importance of selecting high-quality putty powder manufacturers.

外墻膩?zhàn)臃鄢霈F(xiàn)雜質的原因主要有兩個方面。一方面，在攪拌和批刮過程中，可能混入雜質，如灰塵、砂礫等。這些雜質不僅會影響膩?zhàn)臃鄣耐庥^效果，還可能對其粘結性能造成影響。另一方面，膩?zhàn)臃鄣恼{(diào)配過程中也可能出現問題，如攪拌不均勻、石膏團先行凝固等，這可能導致膩?zhàn)臃蹆?nèi)部形成未溶解的物質或絨狀物，從而產生雜質。

There are two main reasons for impurities in exterior wall putty powder. On the one hand, during the mixing and scraping process, impurities such as dust, gravel, etc. may be mixed in. These impurities not only affect the appearance of putty powder, but may also have an impact on its bonding performance. On the other hand, there may also be problems in the mixing process of putty powder, such as uneven mixing, early solidification of gypsum balls, etc. This may lead to the formation of undissolved substances or fluff like substances inside the putty powder, resulting in impurities.

為了外墻膩?zhàn)臃鄢霈F(xiàn)雜質問題，可以從以下幾個方面著手。在施工過程中，應注意施工器具的清潔衛生，避免雜質混入。同時，在進行批刮前，應做好基層處理，確保墻面干凈、無雜質。其次，在調配膩?zhàn)臃蹠r，應講究方法并充分?jǐn)嚢瑁_保膩?zhàn)臃鄣木鶆蛐院头€(wěn)定性。特別是對于石膏膩?zhàn)拥恼{(diào)配，應特別注意攪拌均勻，避免石膏團先行凝固。在施工完成后，應對膩?zhàn)訉舆M(jìn)行妥善保養和維護，避免硬物刮擦和磕碰，以保持其外觀和性能的穩定。

To address the issue of impurities in exterior wall putty powder, the following measures can be taken. During the construction process, attention should be paid to the cleanliness and hygiene of construction equipment to avoid impurities mixing in. At the same time, before batch scraping, the base layer should be properly treated to ensure that the wall is clean and free of impurities. Secondly, when preparing putty powder, attention should be paid to the method and thorough stirring to ensure the uniformity and stability of the putty powder. Especially for the preparation of gypsum putty, special attention should be paid to mixing evenly to avoid the gypsum lump solidifying first. After the construction is completed, the putty layer should be properly maintained and maintained to avoid scratches and bumps from hard objects, in order to maintain its stable appearance and performance.

外墻膩?zhàn)臃鄣碾s質問題是一個需要引起關注的問題。通過注意施工器具衛生、做好基層處理、講究膩?zhàn)臃壅{(diào)配方法和充分?jǐn)嚢琛⑼咨票ｐB(yǎng)和維護等措施，可以外墻膩?zhàn)臃鄢霈F(xiàn)雜質問題。同時，選擇優質的膩?zhàn)臃蹚S家也是外墻膩?zhàn)臃鄢霈F(xiàn)雜質問題的關鍵因素之一。

The issue of impurities in exterior wall putty powder is a concern. By paying attention to the hygiene of construction equipment, doing a good job in grassroots treatment, paying attention to the method of mixing putty powder, and taking measures such as sufficient mixing, proper maintenance and upkeep, the problem of impurities in exterior wall putty powder can be solved. Meanwhile, selecting high-quality putty powder manufacturers is also one of the key factors causing impurities in exterior wall putty powder.