成品的濟南抹灰砂漿，在出廠以后都會配有出廠的小票。小票上會寫明檢查的項目。而且抹面砂漿會有相應的檢測報告。下面來講講檢測項目吧。

The finished Jinan plastering mortar will be equipped with factory tickets after leaving the factory. The inspection items will be written on the ticket. And the plastering mortar will have the corresponding test report. Let's talk about the test items.

目前對抹面砂漿的出廠檢驗包括初凝時間、抗壓強度、密度、稠度和收縮率。抹灰干拌砂漿相關標準、規范有三個：《蒸壓加氣混凝土用砌筑砂漿與抹面砂漿》、《建筑砂漿基本性能試驗方法》、《水泥膠砂干縮試驗方法》。性能測試為材料的標準稠度、砂漿的保水性、分層度及砂漿的流動性四個方面。

At present, the factory inspection of plastering mortar includes initial setting time, compressive strength, density, consistency and shrinkage. There are three relevant standards and specifications for plastering dry mixed mortar: masonry mortar and plastering mortar for autoclaved aerated concrete, test method for basic performance of building mortar, and test method for dry shrinkage of cement mortar. The performance test includes four aspects: the standard consistency of the material, the water retention of the mortar, the layering degree and the fluidity of the mortar.

出廠檢驗

Delivery inspection

出廠檢驗包括初凝時間、抗壓強度、密度、稠度和收縮率。

Delivery inspection includes initial setting time, compressive strength, density, consistency and shrinkage.

性能測試

performance testing 

(1)材料的標準稠度

(1) Standard consistency of material

干拌砂漿按具體的設計標準用水量加水混合后，按規定方法攪拌均勻。以此判斷材料的性能，是否達到設計要求。方法原理是抹灰砂漿的濕砂漿對標準試桿(或試錐)的沉入具有一定阻力，通過試驗濕砂漿的沉入度，確定砂漿的基本性能是否符合出廠要求。

The dry mixed mortar shall be mixed with water according to the specific design standard, and then mixed evenly according to the specified method. So as to judge whether the performance of the material meets the design requirements. The method principle is that the wet mortar of the plastering mortar has a certain resistance to the sinking of the standard test rod (or test cone). By testing the sinking degree of the wet mortar, determine whether the basic performance of the mortar meets the factory requirements.

(2)砂漿保水性

(2) Water retention of mortar

砂漿混合物能夠保持水分的能力稱為保水性。保水性也指砂漿中各項組成材料不易分離的性質。

The ability of mortar mixture to retain water is called water retention. Water retention also refers to the property that the constituent materials in the mortar are not easy to separate.

(3)分層度

(3) Stratification degree

砂漿的保水性是用分層度表示的。攪拌均勻的砂漿靜置30min后，上下層砂漿沉入量的差值，稱為分層度。

The water retention of mortar is expressed by layering degree. The difference between the sinking amount of the upper and lower layers of mortar after the evenly mixed mortar is left standing for 30min is called the layering degree.

(4)砂漿的流動性

(4) Fluidity of mortar

砂漿的流動性也叫稠度，是指在自重或外力作用下流動的性能。施工時，砂漿鋪設在粗糙不平的磚石表面上，要能很好地鋪成均勻密實的砂漿層，抹面砂漿要能很好地抹成均勻薄層，采用噴涂施工需要泵送砂漿，都要求砂漿具有一定的流動性。

The fluidity of mortar is also called consistency, which refers to the fluidity under the action of self weight or external force. During construction, the mortar shall be laid on the rough and uneven masonry surface, which shall be well paved into a uniform and dense mortar layer, and the plastering mortar shall be well plastered into a uniform thin layer. The spraying construction requires pumping mortar, which requires a certain fluidity.

成品的抹灰砂漿需要檢測的項目就是以上相關內容了，如果您對該產品有需求選購的話就關注我們網站http://www.man5g.cn，聯系我們了解更多。

The items that need to be tested for finished plastering mortar are the above related contents. If you need to buy this product, please pay attention to our website http://www.man5g.cn , contact us for more information.