How to adjust putty powder and what problems should be paid attention to in the process of mixing

一，在調配膩子的時候準備工作要先做到位。大家要準備一個適合電動攪拌的容器，并且一定要將它徹底的清潔干凈，同時為了確保攪拌均勻要使用低轉速高功率的電動攪拌器。準備工作做好以后，就可以開始調配了。進行調配的時候，要先加入一定量的水，然后倒入膩子粉進行攪拌，一般膩子粉和水的比重應該為1：0.5.現在一般用的都是耐水膩子粉，只用清水攪拌就行了。如果有些消費者購買的膩子粉在攪拌的時候還需要加入膠水的話，那一定不是耐水膩子。因為現在的耐水膩子在制作過程中已經加入了膠粘劑，使用的都是預糊化的淀粉，而非耐水膩子里面添加的都是含有甲醛的膠水，現在已經被淘汰了，所以大家在選購的時候為了家人的身體健康，一定要了解清楚。

1、 When mixing putty, the preparation work should be done in place first. We should prepare a container suitable for electric mixing, and must thoroughly clean it. At the same time, in order to ensure uniform mixing, we should use low-speed and high-power electric mixer. After the preparations are made, the deployment can be started. When mixing, first add a certain amount of water, and then pour putty powder for mixing. Generally, the specific gravity of putty powder and water should be 1:0.5. Now, water-resistant putty powder is generally used, and only water can be stirred. If some consumers need to add glue when mixing putty powder, it must not be water resistant putty. Because the current water-resistant putty has been added with adhesives in the production process, the use of pre gelatinized starch, but not water-resistant putty, which contains formaldehyde glue, has been eliminated, so we must understand clearly when purchasing for the sake of family health.

二，大家要注意的是，攪拌的膩子漿不能太干，因為太干的話膩子粉中的添加劑不容易充分的溶解，粘接性會受到影響，而且在后期的使用過程中，也容易造成膩子層的開裂。并且膩子漿也不能太稀，過稀的膩子漿在粉刷的過程中容易造成浪費。所以大家攪拌的時候一定要注意、

2、 It should be noted that the putty slurry should not be too dry, because if it is too dry, the additives in the putty powder are not easy to be fully dissolved, and the adhesion will be affected. Moreover, in the later use process, it is easy to cause the putty layer to crack. And putty slurry can not be too thin, too thin putty slurry in the process of painting is easy to cause waste. So we must pay attention to mixing

三，膩子充分的攪拌好以后，要靜置15-20分鐘的時間，這個過程就是為了讓膩子粉中的添加劑充分的溶解。在這里小編可以教給大家一個鑒別膩子粉的好壞的方法，那就是用膩子板進行攪拌，然后挑一點膩子漿在膩子板上，把板子反過來，膩子漿也不會掉的話，那就表示大家買的都是質量好的膩子，反之就是差一點的膩子了。

3、 After the putty is fully stirred, it should be left for 15-20 minutes. This process is to fully dissolve the additives in the putty powder. Here, Xiaobian can teach you a way to identify the quality of putty powder, that is, stir with putty board, and then pick a little putty paste on the putty board. If the board is reversed, the putty slurry will not fall off, it means that all the putty purchased are of good quality, and vice versa.

如果想要了解更多的話，比如我們濟南膩子粉等等，可以咨詢我們，我們會為你服務的!

If you want to know more, such as our Jinan putty powder, you can consult us, we will serve you!