Jinan plastering mortar will encounter the problem of uneven mixing in production. The mixing effect directly affects the quality of products, production problems also affect the sales performance of users, and affect economic development. However, there may be two reasons for the uneven mixing of dry mortar equipment, which may be due to the user's input of materials, materials first, and then water, or because the two mixers are suitable for the user's selection. In order to protect the excellent role of dry mortar mixing equipment, the user not only needs to select the appropriate mixer according to the normal order, materials, but also production needs.

　　根據工藝計劃要求和生產周期確定技能計劃。包括:上料順序、快速精密上料設備的形式及配置、計量料倉的材質、容積、料倉錐角、進出口閥門、軟組合、稱重傳感器的型號及規格、安裝及調節方式、計量計量顯示及儀表控制等。額定負荷的選擇一般為投料倉總皮重和稱量(各種物料和物料的總量)的120%。

　　Determine skill plan according to process plan requirements and production cycle. Including: feeding sequence, form and configuration of fast and precise feeding equipment, material and volume of metering silo, silo cone angle, inlet and outlet valves, soft combination, model and specification of weighing sensor, installation and adjustment mode, metering display and instrument control, etc. The selection of rated load is generally 120% of the total tare weight and weighing (total amount of various materials and materials).

　　如果選擇的規格太小，沖擊載荷和意外因素可能會對稱重傳感器造成損壞。如果規格太大，分辨率不好，影響精度。干粉砂漿生產線投資。干粉砂漿設備生產線一次性投資大，一般企業難以承受，所以干粉砂漿生產線生產企業相對較差。另外，由于干粉砂漿的技術含量高，使用當地資料存在一定的困難，給干粉砂漿的綜合推廣帶來困難。干粉砂漿設備在生產的過程中,可能會有遇到物料結塊現象,這種情況的原因可能是由于一次性混合量太大,可以把兩個或三分鐘結成塊狀材料靜態,材料放手,另一個原因可能是由于生產材料存放時間太長,外部環境的影響下,解決這個問題的一個好方法是更換材料的使用,注意保存在果實下的材料，檢查材料空間一定要堅持干燥通風。

　　If the selected specification is too small, impact load and unexpected factors may cause damage to the load cell. If the specification is too large and the resolution is not good, the accuracy will be affected. Dry mortar production line investment. The production line of dry mortar equipment has a large one-time investment, which is difficult for general enterprises to bear, so the production line of dry mortar is relatively poor. In addition, due to the high technical content of dry mortar, there are some difficulties in using local data, which brings difficulties to the comprehensive promotion of dry mortar. In the production process of dry mortar equipment, there may be material caking. The reason for this may be that the one-time mixing volume is too large, two or three minutes can be formed into a block material static, and the material is released. The other reason may be that the storage time of production materials is too long, and under the influence of external environment, a good way to solve this problem is to replace the use of materials , pay attention to the materials stored under the fruit, and check the material space to be dry and ventilated.

　　以上內容由濟南抹面砂漿廠家整理發布，如果您不了解這方面的裝飾材料或有產品需求可以點擊官網咨詢:http://www.man5g.cnThe above content is arranged and released by Jinan plastering mortar manufacturer. If you do not know the decorative materials or have product requirements, you can click the official website for consultation: http://www.man5g.cn